Connect Claude
This page shows you how to connect Claude to your SuperDocs account, step by step, and how to disconnect it again.
You do not need to be a developer to follow it. You need a SuperDocs account at your firm and a Claude account.
What can Claude do with the connector?
Section titled “What can Claude do with the connector?”The SuperDocs connector lets Claude read your firm’s information in SuperDocs while you work with Claude. Claude acts as you. It sees only what you can already see in SuperDocs.
With the connector, Claude can read:
- the cases you can see,
- the documents in those cases, and the status of each document,
- the people on those cases, with the details the case’s Contacts screen shows.
If you are a firm admin, you can see every case in your firm, so Claude can too. Other users see only the cases that are shared with them. Claude sees the same cases. If your access to a case changes in SuperDocs, the connector follows that change.
What can the connector not do?
Section titled “What can the connector not do?”- It cannot change anything. The first version only reads. It cannot create, change or delete a case, a document or a person.
- It cannot see more than you. A case you cannot see in SuperDocs does not exist for Claude.
- It cannot see other firms. A connection belongs to one person in one firm.
- It does not read intake answers yet. The answers a client types into an intake form are not part of the first version.
- It does not open the PDF files. It reads the facts about a document, not the document itself.
- It cannot do anything that only SuperDocs staff can do.
Which apps can connect?
Section titled “Which apps can connect?”At launch, Claude is the only app that can connect to SuperDocs. Other apps may be added later, when a customer asks for one.
Coming later: changes, with your approval
Section titled “Coming later: changes, with your approval”SuperDocs plans to let Claude make changes later. The first changes planned are:
- Create a case. You may also add a custom packet. If the packet holds an intake form, you may also invite the client.
- Add forms to a case.
These are not available yet. When they come:
- Claude will show you the change in plain words before it happens, and wait for your yes.
- Making changes needs a new permission. A connection that you approved for reading will ask you for consent again before it can make changes.
- Each connection may make at most 30 changes and send at most 10 invitation emails in one hour.
Before you start
Section titled “Before you start”Check these three things before you connect.
- Your firm’s access is switched on. Access is off for every firm at the start. SuperDocs support must switch it on for your firm. The same switch covers the API and the Claude connector. Until it is on, nobody in your firm can connect.
- You are a user of the firm. Firm users can connect. A client of the firm cannot.
- The connector is added to your firm’s Claude organization. An Owner of your firm’s Claude organization does this once, for everyone. The next section shows how.
Add the connector to your Claude organization (Owners only)
Section titled “Add the connector to your Claude organization (Owners only)”An Owner of your firm’s Claude organization does this once. After that, everyone in the organization can connect their own account.
-
In Claude, open the organization settings.
-
Open Connectors.
-
Choose Add, then Custom, then Web.
-
Paste the connector’s address:
https://api.example.com/mcp -
Save the connector.
The address https://api.example.com/mcp is a placeholder. The real address is not decided yet. Use the address that SuperDocs gives you when it is published.
You do not need a client ID or a secret. Claude registers itself with SuperDocs.
Adding the connector does not sign anybody in, not even the Owner. Each person connects their own account in the next section.
Claude’s menus may differ. The menus and buttons in Claude belong to Claude, not to SuperDocs. Their names and places may be different from the words on this page, and they can change. If you cannot find them, look for the connector settings in Claude’s own help pages.
Connect your account
Section titled “Connect your account”Each person does this once, for their own account. Nobody can connect for someone else.
- In Claude, open your Settings, then Connectors.
- Find the SuperDocs connector, and click Connect.
- A SuperDocs sign-in page opens. Check that it is the SuperDocs portal, at the address where you normally sign in.
- Sign in to SuperDocs in the usual way. Use your password, and two-step sign-in or a passkey if you normally use them.
- SuperDocs shows a consent page. Read it. It names the app that asks for access, and says what the app may do.
- Check that the app is Claude, and that you clicked Connect yourself a moment ago. Read Only continue if you just clicked Connect below.
- Choose Allow.
- SuperDocs sends you back to Claude. The connector is now connected.
If you do not want to connect, choose Deny in step 7. Nothing is connected, and Claude is told that you said no.
SuperDocs always asks you to sign in here, even if you are already signed in to the portal. This is on purpose. It makes sure that the person who approves the connection is you, now.
Finish the steps within 10 minutes of clicking Connect. If you take longer, start again at step 1.
Only continue if you just clicked Connect
Section titled “Only continue if you just clicked Connect”Only choose Allow if you clicked Connect in Claude yourself, just before.
If a consent page opens from a link that someone sent you, or from an email, choose Deny or close the page. Someone could send you that link to connect your SuperDocs account to their own Claude. If you choose Allow, they could read the cases you can see.
What happens after I connect?
Section titled “What happens after I connect?”- You get an email from SuperDocs. It says that an app was connected to your account, and where to disconnect it.
- The connection stays until it ends. You do not need to sign in again each time you use Claude. The next section says when a connection ends.
If you get this email and you did not connect an app, disconnect it at once in the SuperDocs portal (see the next section). Then tell your firm admin and SuperDocs support.
When does a connection end?
Section titled “When does a connection end?”A connection ends when one of these things happens:
- You disconnect it in the SuperDocs portal. See the steps below.
- A firm admin disconnects it. A firm admin can see and disconnect the apps connected to any account in the firm.
- Your SuperDocs password changes, or is reset.
- You leave the firm.
- You do not use the connector for 30 days.
- SuperDocs ends it to protect your account, for example when it sees signs of misuse.
After a connection ends, Claude can no longer read anything from SuperDocs for you. To use the connector again, connect again.
A password change ends your connected apps, but it does not end your API keys. If you change your password because you think someone knows it, also revoke your API keys. See API keys.
If your firm’s access is switched off, your connection is not ended, but it stops working. It works again when SuperDocs support switches access back on.
Disconnect Claude
Section titled “Disconnect Claude”- Sign in to the SuperDocs portal.
- Open your settings, and find Connected apps.
- Find Claude in the list.
- Disconnect it.
Troubleshooting
Section titled “Troubleshooting”Claude asks me to connect or sign in again
Section titled “Claude asks me to connect or sign in again”Your connection has ended. See When does a connection end? for the reasons. The most common reason is a password change.
- In Claude, open Settings, then Connectors.
- Click Connect next to the SuperDocs connector.
- Follow Connect your account again.
- If Claude keeps asking you to connect, contact SuperDocs support.
I see “access is not switched on for your firm”
Section titled “I see “access is not switched on for your firm””Your firm’s access to the API and the Claude connector is off.
- Ask your firm admin whether your firm has asked for access.
- If not, your firm admin asks SuperDocs support to switch it on.
- When access is on, follow Connect your account again.
If you are a client of the firm, and not a user of the firm, you cannot connect. This is not a fault.
Nothing happens after I choose Allow
Section titled “Nothing happens after I choose Allow”- Go back to the Claude window or tab. The connection may already be done there.
- In Claude, open Settings, then Connectors, and check whether the SuperDocs connector shows as connected.
- If it is not connected, start again: click Connect, sign in and choose Allow. Finish within 10 minutes.
- Make sure you are signing in to the same SuperDocs account at the firm whose access is switched on.
- If it still does not work, contact SuperDocs support. Tell them the date and time you tried, and what you saw.